Welcome, Guest. Please login or register.

Author Topic: Using PC Formatted Compact Flash Adapter  (Read 2011 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline rockape

  • Sr. Member
  • ****
  • Join Date: Nov 2005
  • Posts: 383
    • Show all replies
    • http://lincsamiga.org.uk/
Re: Using PC Formatted Compact Flash Adapter
« on: September 24, 2007, 04:51:09 PM »
Hi,

You must install "FAT95" and "compactflash.device" and "CF0"to enable the PCMCIA Card reader to work.

see http://aminet.net/disk/misc/fat95.readme

"fat95" is a DOS handler to mount and use Win95/98 volumes just as if they were AMIGA volumes."

NOTE

When you install FAT95 there is no progress bar for instalation, it just installs.

----

See http://aminet.net/disk/misc/cfd.readme

"Read and write your digital photos, mp3 files etc. directly from CompactFlash cards as used by many mobile devices."

Installation

Copy cfd/devs/compactflash.device to DEVS:

Copy CF0 to Workbench:Devs/DOSDrivers/

If you run OS 3.5+: Copy cfd/def_CF0.info to both sys:prefs/env-archive/sys and env:sys

Mount the drive by double-clicking cfd/devs/CF0.


Works for me with CF Cards from 16 meg to 2 Gig.

Kind Regards, Michael

aka rockape
"A veteran is someone who, at one point in their life wrote a blank check made payable to \'Their Country\' for an amount of \'up to and including their life\'.