powerflyer gold = FastATA MK 1 w allegrocdfs
you have to enable base page access on startup and the 68k driver works ok if somewhat slower than it does in 3.x due to some emulated functions. Example from my setup, using elbox's own drivespeed, 6.8mb on 3.x, 5.4mb on os4, still a big improvement over the plain 1.8mb without the driver not to mention that it enables the second ide channel and any extra devices you may have installed there.
Elbox's new drivers are for mk3 users and I don't think they give it to non registered mk3 users, eventhough I suspect they would work fine with mk1 and mk2 just as well as the hardware differences are minimal at best....
