powericons icons going walkies

[nasty]

i thought i'd get around to replacing my icon again and now wishing i didnt. I've replaced afew icons and they are working fine but now im having afew issues with ram and my other partition icons, here's what im doing for the ram icon:

using copyicon to replace the old magic workbench icon and the snapshooting the new icon and using the following command in shell:

Copy Ram:disk.info envrc/sys/def_ram.info

and on reboot the mwb icon is back
im not to sure on the other partitions tho dh0/1/2! if i replace the workbench (dh0) the icon changes fine then on reboot its gone back to the default 3.9 icon :getmad:  

[nasty]

copy envrc:sys/def_ram.info Ram:disk.info >NIL:

thank you for your help guys, but still no joy.  

but after messing around for afew hour's i notice that some boots the workbench icon would be the default icon except it would be blue and on other times i would boot the workbench icon would be the nice png icon but the work partition would be the default icon and blue :-?

[nasty]

thanks moto, my ram icon has now been changed but now its turned to the default 3.9 workbench icon :-? if i go to information on each partition then it displays the new png icon in the information window.  If i hit save it changes the workbench icon to the new png icon, but then on reboot it goes back to the default!

[nasty]

Assign >NIL: ENV: RAM:ENV
Assign >NIL: T: RAM:T
Assign >NIL: CLIPS: RAM:Clipboards
Assign >NIL: REXX: S:
Assign >NIL: PRINTERS: DEVS:Printers
Assign >NIL: KEYMAPS: DEVS:Keymaps
Assign >NIL: LOCALE: SYS:Locale
Assign >NIL: LIBS: SYS:Classes ADD
Assign >NIL: HELP: LOCALE:Help DEFER

BindDrivers
C:Mount >NIL: DEVS:DOSDrivers/~(#?.info)

C:LoadMonDrvs

SetEnv Language "english"
SetEnv Workbench $Workbench
SetEnv Kickstart $Kickstart
UnSet Workbench
UnSet Kickstart

C:AddDataTypes REFRESH QUIET
C:IPrefs
C:ConClip

Path >NIL: RAM: C: SYS:Utilities SYS:Rexxc SYS:System S: SYS:Prefs SYS:WBStartup SYS:Tools SYS:Tools/Commodities

SYS:System/REXXMast >NIL:

IF EXISTS S:User-Startup
  Execute S:User-Startup
EndIF

Resident Execute REMOVE
Resident Assign REMOVE
Run >NIL: Powericons >NIL:
C:LoadWB
EndCLI >NIL:

end of file

[nasty]

think this might be the cause of the problem:
user-startup

copy > NIL: SYS:S/RAM.info TO RAM:Disk.info                                                  ; added by MagicWB

run >nil: C:MagicWB-Demon 4,123,123,123 5,175,175,175 6,170,144,124 7,255,169,151 8,0,0,255  ; added by MagicWB
;BEGIN ActivateCrossIDEfix
ActivateCrossIDEfix ALL
;END ActivateCrossIDEfix
;BEGIN CacheCDFS
;END CacheCDFS
assign >NIL: MagicWB: SYS:Prefs/MagicWB-Images
;BEGIN ViNCEd
; Remove the ; default console handler CON:
; Entfernen Sie das ; die Standardkonsole CON: verwenden wollen.
COPY SYS:Prefs/Env-archive/sys/def_ram.info  Ram:disk.info
;SetVNC Quiet Mount Override as CON:

; Remove the ; gadgets with new functions from ViNCEd that can be set with prefs tool ViNCEd.
; Entfernen Sie das ; Fähigkeiten von ViNCEd in Texteingabefeldern wollen. Diese konfigurieren Sie
; auch mit dem Voreinsteller ViNCEd.

;StringSnip >NIL: INSTALL

; Remove the ; assigns in pattern matching commands.
; Entfernen Sie das ; Unterstützung der mehrfach Assign in Dateinamensmustern wünschen.

;TrueMultiAssigns
;END ViNCEd
;BEGIN Genesis
assign AmiTCP: "Workbench:Internet/Genesis"
;END Genesis
;BEGIN Mixer
Path sys:prefs ADD
Mixer NOGUI QUIET
;END Mixer
;BEGIN Picasso96
Assign Picasso96: "Work:Picasso96"
;END Picasso96

ok removed the mwb and the icons have gone to 3.1 icons. so i'll format and have a fresh install of 3.9 except from this time i wont install magic workbench

[nasty]

tryed and still didnt work, so nothing much to do today so i'll just do a fresh install and try AFA_os out looks kinda cool :-)