Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: for all the FASTLANE SCS Z3 user  (Read 5982 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline SIR-GERMANTopic starter

  • Jr. Member
  • **
  • Join Date: Nov 2005
  • Posts: 55
    • Show all replies
for all the FASTLANE SCS Z3 user
« on: March 21, 2006, 12:40:59 AM »
i need some help because i think i am going crazy .
i just buy a fastlane and i got a seagate barracuda 4 gigas 68 pins , so i got the connector to 50 pins but it did not work .
the board does not see it .
ok then i went to ebay i got a ibm 17 gigas 80 pin , and i buy  
the connector to 50 pins . ok os 3.9 sees the hardrive but i does not let format or partition .
ok i went and i buy a new quantun altas 9 gigas 80 pins i got the connector to 50 pins and again 0s 3.9 does not see it again like the seagate .
then i went and  i got rom 8.5 for the fastlane , still same result .
i try a old 1 giga ibm 50 pins and it work ok , and i try a 50 cd rom work ok .
wich hard drive should i buy ??
anyone can tell me what are they using in the fastlane ?
thank for your time
Logged
 

Offline SIR-GERMANTopic starter

  • Jr. Member
  • **
  • Join Date: Nov 2005
  • Posts: 55
    • Show all replies
Re: for all the FASTLANE SCS Z3 user
« Reply #1 on: March 21, 2006, 04:56:27 AM »
i think is 8 but i am not using any memory
so is that relevant ?
Logged
 

Offline SIR-GERMANTopic starter

  • Jr. Member
  • **
  • Join Date: Nov 2005
  • Posts: 55
    • Show all replies
Re: for all the FASTLANE SCS Z3 user
« Reply #2 on: March 21, 2006, 04:56:49 AM »
amiga 4000d
Logged
 

Offline SIR-GERMANTopic starter

  • Jr. Member
  • **
  • Join Date: Nov 2005
  • Posts: 55
    • Show all replies
Re: for all the FASTLANE SCS Z3 user
« Reply #3 on: March 21, 2006, 04:03:28 PM »
what i need then is get a 50 to 68 pin device then get a 68 pin cable with a termination and try .
i still dont get it about the 8 bit termination can you explain more ?
thank for your time
Logged
 

Offline SIR-GERMANTopic starter

  • Jr. Member
  • **
  • Join Date: Nov 2005
  • Posts: 55
    • Show all replies
Re: for all the FASTLANE SCS Z3 user
« Reply #4 on: March 21, 2006, 04:06:03 PM »
can you tell me the jumpers for the fastlane  if i am using in internals devices ?
thank for your time
Logged
 

Offline SIR-GERMANTopic starter

  • Jr. Member
  • **
  • Join Date: Nov 2005
  • Posts: 55
    • Show all replies
Re: for all the FASTLANE SCS Z3 user
« Reply #5 on: March 22, 2006, 02:44:21 AM »
what do i have to do to fix that problem ( uper bites ) with the 68 pin devices ?
thank for your time
Logged
 

Offline SIR-GERMANTopic starter

  • Jr. Member
  • **
  • Join Date: Nov 2005
  • Posts: 55
    • Show all replies
Re: for all the FASTLANE SCS Z3 user
« Reply #6 on: March 22, 2006, 05:00:36 AM »
i did but maybe is something i am doing wrong , or another thing wich i have no idea
Logged
 

Offline SIR-GERMANTopic starter

  • Jr. Member
  • **
  • Join Date: Nov 2005
  • Posts: 55
    • Show all replies
Re: for all the FASTLANE SCS Z3 user
« Reply #7 on: March 22, 2006, 06:14:39 AM »
what is a molex connector ?
i am going to send a email to him, thank for your pm
Logged
 

Offline SIR-GERMANTopic starter

  • Jr. Member
  • **
  • Join Date: Nov 2005
  • Posts: 55
    • Show all replies
Re: for all the FASTLANE SCS Z3 user
« Reply #8 on: March 22, 2006, 01:06:41 PM »
where do i buy that 50->68pin adaptor which terminates the upper Byte?
thank for your time
Logged
 

Offline SIR-GERMANTopic starter

  • Jr. Member
  • **
  • Join Date: Nov 2005
  • Posts: 55
    • Show all replies
Re: for all the FASTLANE SCS Z3 user
« Reply #9 on: March 23, 2006, 12:01:37 AM »
Logged
 

Offline SIR-GERMANTopic starter

  • Jr. Member
  • **
  • Join Date: Nov 2005
  • Posts: 55
    • Show all replies
Re: for all the FASTLANE SCS Z3 user
« Reply #10 on: March 23, 2006, 12:57:48 AM »
"the other option is to only have 68/80pin devices with a 68wire ribbon cable hooking them all together. then at least the upper 8 bits are terminated, and the host adapter with a 68-50pin plug is on the lower 8 bits."

i am going to try this one

fastlane 50 pin + 50 to 68 pin + 68 pin cable -------80 pin hardrive ----------80 pin hardrive ---------end Active Terminator
i think if i do it that way i dont have to terminated the upper 8 bit.
to use the 80 pin hd i have the connector 68to80 pin.
is that ok

Logged
 

Offline SIR-GERMANTopic starter

  • Jr. Member
  • **
  • Join Date: Nov 2005
  • Posts: 55
    • Show all replies
Re: for all the FASTLANE SCS Z3 user
« Reply #11 on: March 23, 2006, 02:35:55 AM »
no reply yet
Logged
 

Offline SIR-GERMANTopic starter

  • Jr. Member
  • **
  • Join Date: Nov 2005
  • Posts: 55
    • Show all replies
Re: for all the FASTLANE SCS Z3 user
« Reply #12 on: March 23, 2006, 03:53:06 AM »
i will dont worry , i did not buy anything yet , i am just waiting . thank for your time
Logged
 

Offline SIR-GERMANTopic starter

  • Jr. Member
  • **
  • Join Date: Nov 2005
  • Posts: 55
    • Show all replies
Re: for all the FASTLANE SCS Z3 user
« Reply #13 on: April 10, 2006, 01:21:20 AM »
i got from ebay a 80 to 50 pin adaptador with the upper bit termination and i did not work .;
i guess is a problem with the scsi hardrive so
does anyone can tell me a good scsi hardrive that will work with the fastlane for sure
Logged
 
Pages: [1]   Go Up
« previous next »