PlayCd wont work??

[JaXanim]

I suspect there are several issues here.

The first is the Unit= number in the PlayCD icon.

UNIT=0 is usually the boot drive. Do you boot from the CDRom or a hard drive?

If the latter, the PlayCD UNIT=number should coincide with the location of the CDRom you wish to use for PlayCD. You can't use both (if I understand the IDE setup correctly).

So, Unit=0 is the Channel1 Master (Boot disk)
Unit 1 is Channel 1 Slave, Unit 2 is Channel 2 Master and Unit 3 is Channel 2 Slave.

Also in the PlayCD icon, the DOSDev= setting should correspond with the icon you use for the selected CD drive DOSdriver icon. It could be CD0, Cd1, etc.

I have DEVICE=scsi.device in my PlayCD icon and BUFMEMTYPE is active.

Cheers,

JaX

[JaXanim]

@swift240

Does this tally with the tooltypes in the CD0 icon? (It's in Wb:Devs/DOSdrivers)

Cheers,

JaX

[JaXanim]

@Framiga

He needs a PowerFlyer Gold to run the AllegroCDFS. I don't think he's got this kit.

@Swift240

What interface module do you have?

Cheers,

JaX

[JaXanim]

@swift240

Forget about AllegroCDFS with your IDE module. Go to Aminet and search for IDEfix drivers and CD filesystems, which should be more appropriate.

All the foregoing stuff about Devices and Unit numbers applies.

Cheers,

JaX