WhdLoad issue

[dougal]

I replaced my A1200 170mb hard drive with a 20GB.

It is setup as a 4GB with FFS. I installed WHDload, but for some reason a few games are not loading, as in they get stuck on the WHDload credit screen (where it says the quit key, credits, registered info etc..)

The thing is that if i run these games from the PCMCIA CF card they run fine with no problems. They might work once every 5 times of HD but everytime from card.

I tried re-installing WHDLoad but no luck. I am using WHDloa 16.9.

I have not installed IDEFIX97 yet. Maybe it needs that?

[dougal]

Just set the max transfer on the Games partition.. seems to have done the trick.  

Thanks guys

Oh one more thing... should i do it for the other partitions like System & Work ?

[dougal]

I would do. Just then your limiting the amount of layers your having to go through when troubleshooting. Also remember to hit return when making the alterations lol. I can't stress that as I have forgot to do that and it's not stored any changes.

Yep I remembered that part of hitting return. I'll do all the partitions then.

Everything seems to be working great now

Cheers guys

[dougal]

Damn.. did it again.

Just copied Aladdin from PC to CF. Ran fine of CF.

Copied to HD and it gets stuck. HD light on and blue window of WHDLoad.

Tried re-copying it from CF to HD but still the same.

[dougal]

Are you running the cf in the Amiga or emulation? Have you downloaded a disk tool to check the mechanical had is not faulty. If not I would grab one off aminet and just allow it to do a check for any bad sectors ECT.
 
It might be a physical fault with the disk causing these issues now. So you need to rule this out.

Everything is being run in the Amiga. Its strange, its morning now.. I had a go and Aladdin loaded no problem off hard drive.

Do you recommend any particular disk tool for me to download to check the HD? I downloaded DiskSalv from Aminet.

[dougal]

Dougal, I have an unrelated WHDLoad issue... next time Aladdin messes up on you, can you re-boot and post here any Tooltypes you see in the icon (the .info file) for it?

Got some odd 'phantom tooltype' issues after upgrading to the newest WHDLoad... Real live registered, PAID-FOR keyfile, BTW.

All there was was Default Tool: Whdload