Cybervision 64/3D crashing the ami

[Amiduffer]

Hi all.

I've put a Cybervision 64/3D in the A4000D, and its having some problems.

A4k, AOS 3.9 with both B.B's, max onboard chip and fast RAM, cybergrafx v3.

Looks super, but, by opening any drawers beyond HD0: and HD1:, will crash the system. I can start programs by Shell (wow, look at those ImageFX screens!) with no problems.

By the way, I have both my 1084s and PC monitor hooked up at the same time, and they work in tandem, especially with ImageFX and Imagine3D. Is that anything to worry about?

Thanks.

[Amiduffer]

Lorraine wrote:

Same thing happened to me.

Took me a bit to figure this out but CyberGFX 3 doesn't get along with BoingBag 2. The only solution is to upgrade CyberGFX or miss out BB2.

If, by installing P96, will I have to remove the CGFX3 from the HD?

Upgrading to 4 makes sense though.

[Amiduffer]

darksun9210 wrote:
either that or upgrade to CyberGraphix 4, but picasso96 is free, so either or..

i would say what buster revision do you have? but i've not had problems with either 9 or 11 and a CV64/3D...

if you take the card out, are you able to open draws again?

Buster 11. If I have the screensize in 640 x 480 hires, there's no problems with opening drawers.