A500 Amiga Forever.

[som99]

Hello ive bought amiga forever just to get my hands on the fullversion of Amiga Explorer, well i did as they said at the setup, configured the serial port on the amiga,

 then i configured on the PC well what hapend then the
"Type SER: to RAM:Setup" worked fine on the wizard on the pc and i got the file from the pc to the amiga ram but when i where going to install it "RAM:Setup" i got this error, "The file is not an object module" so i tryed to copy it from the ram to a blank disk "COPY RAM:Setup to DF0:" worked fine then when trying to run i tested both "DF0:Setup" and "RUN DF0:Setup" still same error, so i resseted my amiga and inserted another of my WB 1.3 disks and booted with that, then i tryed al from beggining and same crap so i resetted and booted with WB 1.2 and same so now i used my last original WB 1.33 i had and still same so i tryed to write "Type SER: to DF0:Setup" directly but still same error. I need this to work any ideas how to do?

//som99

[som99]

Im suprised noone here knows how to do this?

//som99

[som99]

Sorry ive copied it from the pc like 50 times now all same result im clueless can it be that the pc dont send the file? and the amiga creates a empty file in the ram that is not openable?

//som99

[som99]

Well the setup on the ports is same on both pc and amiga and the same as the setup of Aexplorer said, i will try to lower speed but doubth that would work. also how do i see if they are handshaking? and i do not have any of those programs on a a500 WB1.3.3 so can't copy on flopy and well the cable is like 30cm long lol and if i get the file setup on the amiga but its corupted does that mean that they are connected or is it mabe a file the amiga made but dident get anything from the seriall from the pc?

and Technoid i cant send simp+le ascii files cud the program sends just the setup file before u can send anythiong else to the amiga.

//arathorn963