Welcome, Guest. Please login or register.

Author Topic: A4000 Expansion board diagnostic (Red Screen on boot)  (Read 3153 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline dvvrue95Topic starter

  • Full Member
  • ***
  • Join Date: Sep 2005
  • Posts: 133
    • Show all replies
A4000 Expansion board diagnostic (Red Screen on boot)
« on: February 17, 2009, 03:21:10 PM »
Hi folks,

any one know if there is a explanation of the above, with specific reference to the Mnfctr/Product/Status fields. I have a problem with a 1/2length Zorro II Ram expansion card I have populated with 6M of Zips. The diagnostic screen displays :-

S/no. Bd/no. Mnfctr. Product Status Bd/size   Bd/Address
----------------------------------------------------------
 3      1     4626     23     Wkg    64k     $00E90000
 0      2     5768    136     Dfctv 4096k    $00200000
 0      3     5768    136     Dfctv 2048k    $00600000
 1      4     2092      6     Wkg    64k     $00EA0000  

I have tried various jumper settings on the Ram board and even removed and changed around the Zips without much luck, so any help or ideas would be useful, Ian
\\"I keep six honest serving men
They taught me all I knew
Their names are What and Why
and When and How and Where and Who\\"
.......... Rudyard Kipling
 

Offline dvvrue95Topic starter

  • Full Member
  • ***
  • Join Date: Sep 2005
  • Posts: 133
    • Show all replies
Re: A4000 Expansion board diagnostic (Red Screen on boot)
« Reply #1 on: February 17, 2009, 05:18:06 PM »
Hi Tripitalca,

thanks for feedback, but I may have confused you
(and myself) by referring to a red screen on bootup
what I was describing was the expansion board diagnostic screen being red - not just a blank red screen oops
sorry for confusion
Ian
\\"I keep six honest serving men
They taught me all I knew
Their names are What and Why
and When and How and Where and Who\\"
.......... Rudyard Kipling
 

Offline dvvrue95Topic starter

  • Full Member
  • ***
  • Join Date: Sep 2005
  • Posts: 133
    • Show all replies
Re: A4000 Expansion board diagnostic (Red Screen on boot)
« Reply #2 on: February 18, 2009, 05:02:13 PM »
I've tried entering the manufacturer amd product numbers into the Amiga database put it just says not found.

The only ZII boards I have installed are listed in first message, a couple of 64K boards and 6M on the "dfctv" board.

I think the nearest board shown in the  Amiga database
is the AlfaRam RA2-8M board with autoconfig ID 2092/8.

Can I verify if the autoconfig ID has worked correctly
and may be that is why card is showing up defective?

Yes there is a disable jumper on the card and if I set
this machine boots up and runs fine.

Also if I run Sysinfo I can see the card under the "boards" display with correct memory (6M) but it does not appear under the "memory" display.
\\"I keep six honest serving men
They taught me all I knew
Their names are What and Why
and When and How and Where and Who\\"
.......... Rudyard Kipling
 

Offline dvvrue95Topic starter

  • Full Member
  • ***
  • Join Date: Sep 2005
  • Posts: 133
    • Show all replies
Re: A4000 Expansion board diagnostic (Red Screen on boot)
« Reply #3 on: February 18, 2009, 05:38:15 PM »
Hi Matt,

You have my set up correct apart from the 8M ram card which I have only zips to populate to 6M.

As I state in my previous message I think the nearest "lookalike" memory card is the :-

ALFARAM RA2-8 AUTOCONFIG ID 2092/8
from the Amiga database photo and description.

Ian
\\"I keep six honest serving men
They taught me all I knew
Their names are What and Why
and When and How and Where and Who\\"
.......... Rudyard Kipling