Welcome, Guest. Please login or register.

Author Topic: How much would you pay for...  (Read 1961 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline RMK305Topic starter

  • Hero Member
  • *****
  • Join Date: Sep 2005
  • Posts: 506
    • Show all replies
How much would you pay for...
« on: November 05, 2010, 08:01:51 PM »
...an A1200 that you could not see working? There is one near me and the guy had previously said £40 but I'm thinking this is a tad high considering that I can't see it working and there will be no refunds. Unsure is it's a 3.0 or 3.1, but wil try having a closer look over the weekend and a peek in the trapdoor too.

Thanks.
Amiga 4000, Warp Engine 040/40MHz, CV643D with scan doubler module, Tocatta soundcard, Deneb, 72Meg fast ram, 18 gig scsi hard drive.

3xA500, 1xA1200, 1xCD32
 

Offline RMK305Topic starter

  • Hero Member
  • *****
  • Join Date: Sep 2005
  • Posts: 506
    • Show all replies
Re: How much would you pay for...
« Reply #1 on: November 07, 2010, 09:20:35 PM »
Thanks for the advice. I didn't go fot it. It was a guy in a market stall. He had a couple of A500+'s but they were filthy. I have however just unearthed one in the attic and will be hooking it up to test it.

I'll start a new thread if I have issues with it, but the plan is to clean it up wih retrobrite, fit a CF card, a new Indivision and accelerator from Jens and use it as a WHDload machine as well as the A4000 that I have.
Amiga 4000, Warp Engine 040/40MHz, CV643D with scan doubler module, Tocatta soundcard, Deneb, 72Meg fast ram, 18 gig scsi hard drive.

3xA500, 1xA1200, 1xCD32