Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: If You Could Have An Amiga Replacement Mother Board  (Read 4215 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline Protek

  • Full Member
  • ***
  • Join Date: Aug 2005
  • Posts: 164
    • Show all replies
Re: If You Could Have An Amiga Replacement Mother Board
« on: February 22, 2008, 01:27:59 PM »
An A1200 mobo that would enable you to use Zorro and PCI slots while maintaining the mobo in the original desktop case.
Logged
A4000/040 3.1/3.1, 2 MB Chip, 24 MB Fast, Piccolo SD64 2MB, GVP A2000mHC+8 Rev2, 4 GB CF HD via CF IDE
A1200 3.1/3.9, Blizzard 1230MkIV 030@50 with SCSI kit, 2 MB Chip, 128 MB Fast, 1 GB CF HD via CF IDE
A600 3.1/3.1, 2 MB Chip, A603, 1GB CF HD via CF IDE
 

Offline Protek

  • Full Member
  • ***
  • Join Date: Aug 2005
  • Posts: 164
    • Show all replies
Re: If You Could Have An Amiga Replacement Mother Board
« Reply #1 on: February 23, 2008, 11:57:51 AM »
Quote

Dandy wrote:
Quote

Protek wrote:

An A1200 mobo that would enable you to use Zorro and PCI slots while maintaining the mobo in the original desktop case.



And how do you think the  Zorro and PCI cards will fit, if you use the the original desktop case?

The slots would either be vertically or horizontally (on the edge) mounted - but then - where in the original desktop case of an A1200 do you think is space enough to fit in the cards (how many, BTW?)?


Outside the case, of course! At the end of a cable. That's why the mobo needs redesign. Or perhaps some Bodega Bay type expansion.
Logged
A4000/040 3.1/3.1, 2 MB Chip, 24 MB Fast, Piccolo SD64 2MB, GVP A2000mHC+8 Rev2, 4 GB CF HD via CF IDE
A1200 3.1/3.9, Blizzard 1230MkIV 030@50 with SCSI kit, 2 MB Chip, 128 MB Fast, 1 GB CF HD via CF IDE
A600 3.1/3.1, 2 MB Chip, A603, 1GB CF HD via CF IDE
 
Pages: [1]   Go Up
« previous next »