« on: October 17, 2007, 06:51:52 AM »
rkauer wrote:
Power Supply could be the issue!
Some of those AT-PSUs don't have a fine 5V line in the tolerance rating (i.e. aprox. 4.95~5.25V). Check the voltage with a multimeter.
I can second this. I had first an ATX PSU with my old A590 HD. The unit kept rebooting all the time. When I got an original A590 PSU, the drive was rock steady.
Logged
A4000/040 3.1/3.1, 2 MB Chip, 24 MB Fast, Piccolo SD64 2MB, GVP A2000mHC+8 Rev2, 4 GB CF HD via CF IDE
A1200 3.1/3.9, Blizzard 1230MkIV 030@50 with SCSI kit, 2 MB Chip, 128 MB Fast, 1 GB CF HD via CF IDE
A600 3.1/3.1, 2 MB Chip, A603, 1GB CF HD via CF IDE
