« on: August 28, 2006, 10:49:21 AM »
The disk change button could just be stuck because of being dirty. Try spraying some electronic cleaning fluid on it and -carefully- moving it up and down with tweezers. If the spring that lifts the button isn't broken, it should loosen up again.
Logged
A4000/040 3.1/3.1, 2 MB Chip, 24 MB Fast, Piccolo SD64 2MB, GVP A2000mHC+8 Rev2, 4 GB CF HD via CF IDE
A1200 3.1/3.9, Blizzard 1230MkIV 030@50 with SCSI kit, 2 MB Chip, 128 MB Fast, 1 GB CF HD via CF IDE
A600 3.1/3.1, 2 MB Chip, A603, 1GB CF HD via CF IDE
