how to install 2nd diskdrive in 2000

[23703jim]

i have put one chinnon 354 in my 2000 and i would like to put another. i know to jumper j301 (close) to tell the machine that there are two drives. the one drive presently in the machine is jumpered as DS0, do i jumper the 2nd drive as DS1? please advise the proper way in simple laymans terms pleasse and much thanks

james in the good ole usa :-?  :-D

[23703jim]

the bottom drive in pix shows a drive with 6 sets of pins
3 up and 3 down with jumper on right set of two pins, is that DS0 or DS1. the top pix shows a drive with only 3 sets of pins and the jumper is set on the left is that DSO or DS1. both of my drives have 6 pins 3 on top and 3 on bottom. please advise