Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: A4000T not giving video output from my Cybervision64 Card  (Read 9147 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline mdivancic

  • Full Member
  • ***
  • Join Date: Aug 2005
  • Posts: 200
    • Show all replies
Re: A4000T not giving video output from my Cybervision64 Card
« on: August 29, 2006, 02:47:18 AM »
Quote


So maybe the 12v from the serial port and ZorroIII bus are the same?? or shared?
I think that is a good question.



More than likely. You should really take the time to check the power supply directly. The A4000T uses an AT Power supply. Here's the pin out. Good luck.

Mike

http://pinouts.ru/Power/MotherboardPower_pinout.shtml
Logged
Mikey
Amiga 4000T (QuickPak), OS 3.9, QuickPak 060 w/128 MB, Picasso IV, A2065, AD516
Atari Falcon 030, CT-63 w/128MB @ 76MHz, 14 MB RamGizmo, SuperVidel + SVEthLANa
Atari TT030, CaTTamaran, 4 MB ST Ram, 16 MB TT Ram, ECL2VGA
Commodore 128D, 1084S monitor, RAMLink, 4GB CMD Harddrive
Commodore SX-64
 

Offline mdivancic

  • Full Member
  • ***
  • Join Date: Aug 2005
  • Posts: 200
    • Show all replies
Re: A4000T not giving video output from my Cybervision64 Card
« Reply #1 on: August 30, 2006, 01:18:31 AM »
Quote
Thanks for the post..
So are these AT power supplies a direct plug in..with the A4000T motherboard?
Let me get this straight.. the 4000T uses an AT PS..not a ATX PS..is this
correct?


Yes, as others have stated, this is correct. Now test that power supply so we can eliminate that as the problem point (or not)!

Mike
Logged
Mikey
Amiga 4000T (QuickPak), OS 3.9, QuickPak 060 w/128 MB, Picasso IV, A2065, AD516
Atari Falcon 030, CT-63 w/128MB @ 76MHz, 14 MB RamGizmo, SuperVidel + SVEthLANa
Atari TT030, CaTTamaran, 4 MB ST Ram, 16 MB TT Ram, ECL2VGA
Commodore 128D, 1084S monitor, RAMLink, 4GB CMD Harddrive
Commodore SX-64
 
Pages: [1]   Go Up
« previous next »