Cyberstorm 68060 MK II + SCSI Module

[Amigator]

Hello All,

I might have a little problem here.

I just got a new SCSI module for my CS MK II.

Now, the symptoms:

When i boot up the Amiga, without the SCSI module connected, the system boots fine.

When i boot up the Amiga, with the SCSI module connected, the screen stays black, and the IDE drive is not activate (I can tell by the HD LED)

I can see the Cyberstorm "rainbow" though when the module is connected, so the Cyberstorm itself is working correctly.

I thought that i should update the firmware of the CS for the SCSI, so I did.

The updater said that it was succesfull, and the CS "rainbow" still appears, so the board is still ok.

Does anybody have a clue. :-?  :-?

Please :boohoo: , i finally want to use a SCSI drive, instead of IDE, because this is less CPU load, and of course my external SCSI tower too.  :roll:

[Amigator]

Hello all.

Thanks for the tips, the SCSI module works now.:idea:

About the automatic recognition of the HD's geometry:

After selecting cybscsi.device, it reports that there is a Quantum HD sized 17 Gbyte (hd is actually 18.3 Gbyte) :-)

After installing the HD, it reads its config, and says that it is only 1.7 Gbyte... :-?

Well, i have looked on the internet for the tech-specs of the hd and entered it manually. :rtfm:

This seems to work. :-D

The 2 CD-Rom drives and the 1 CD-RW drive are recognized and working perfectly too. :-D

Hehe, now up to the next chapter: installing the Brand New MEDIATOR 4000Di + gfx + 100 Mbps rtl 8139 + FM 801 sound. :-P  :crazy:

[Amigator]

Well then.

The mediator has been installed, but i have another problem.

I installed the fortemedia soundcrad FM801.
It is recognized correclty.

The Paula can be looped trough, it can be heared perfectly.

Also, there is a program, called mixer.
When playing sounds trough paula, which is connected to the line in of the sound card, you can use the volume slider, and the volume is changed for the different types,

But when playing trough AHI, all i hear is crackling sounds...

Also tried a SB128, but this is not working at all.

Recognized, yes, but when playing, the program used stops the playback...

No sounds can be heared.

Any tips on the FM801???

[Amigator]

I have tried that, but this is not working.

Only cracklingg noises... :boohoo: