Hi everyone!
My A4000 (Ks3.1 + Cyberstorm 060 + Cybervision 64) had a 340Mb Hd that dies last month (not an Amiga fail, it didn't work on a PC).
I bought a IDE-CF adapter to replace the old HD but now it do not boot.
I test it with a 32Mb CF with a basic Wb3.1 (when it works i`ll install a 8Gb CF with SFS and three partitions) and it doesn't boot. When I switch it on then begin to read the CF, after a while thge power led blinks an restarts then a Guru Meditation message (Error: 8000 000B Task: 08021B10) and start again.
With the old HD it booted with no problem.
When I boot from Df0: with a WB3.1 disk the CF is displayed on screen and fully accessible (read & write).
When I boot through Early Startup with no Startup-Sequence i can access to the CF content too (cd, list, copy...).
With the 8Gb CF i have the same problem.
anyone know what could be the problem?
Thanks
