How to install "BabelCDROMfs"

[pjhutch]

1. Copy BabelCdROMFS to SYS:L
2. Copy BabelCDROMCtrl to SYS:C
3. Open a Shell window and enter
 ED DEVS:Mountlist

Add the following lines:

CD0: Handler   = L:BABELCDROMFS
     Startup   = omniscsi.device/5
     StackSize = 4000
     Priority  = 10
     GlobVec   = -1

Note, the device and unit number may be different for your IDE or SCSI card so change it to match yours.

To test it, either reboot or type Mount CD0: (syntax may vary on older AmigaOS').

[pjhutch]

Before WB 2.1 and the emergence of DOSDrivers, Workbench kept all the mount files in one big file called the 'mountlist' and the Mount command read the file and loaded the specified driver in it.

Workbench 2.1 and later split the mountlist into individual files called DOSDrivers which makes it easier to add/remove drivers.