A4000 and CyberStorm 060 problem

[leofoe]

I bought a CyberStorm from doctorq and I have a lot of trouble getting this card to work properly.

Configuration:
A4000D with 18MB RAM and CyberStorm 68EC060 with 128MB RAM. ROM 3.1. KS 45.57, WB45.3, OS3.9 BB1 and BB2. CyberVision 64/3D and X-Surf. Picasso96 (tried CGX v3 also).

I had to install OS3.9, the BBs and Picasso96 by removing the CyberStorm and putting the A3630 back in temporarily. If I did install OS3.9 with the CyberStorm in place I got the error "cannot find workbench.library version 45.x" on loading AmiDock. Many programs wouldn't run either. So after installing everything with the 030 I swapped the accelerators. It runs fine except some programs, which is very annoying.
These prefs programs guru immediately: Screenmode, Print, Input.
HDToolbox freezes after clicking OK and the videoplayer after opening a file.

The position of the CyberVision and X-Surf is critical: in some combinations of slots the boards aren't recognized or only one of them is recognized.

Already tried different options on SetPatch, such as skipping scsi.device.

Any clue would be very much appreciated.

Edit: forgot to mention that it's a CS MkII.

[leofoe]

@Framiga: I have seen that. But I don't get this message after installing the OS via the A3630. AmiDock runs fine with the CS. But others don't.

[leofoe]

@Flashlab: I have these installed:
68040: 46.5
68060: 46.7
Are these the latest? Older ones give harddisk-errors or the machine won't boot at all.

[leofoe]

I do have the latest then. Having the 68040new.library in LIBS: doesn't make any difference to my problems.

[leofoe]

As I said: the CS has a 68EC060 on it. No FPU, no MMU.

[leofoe]

No more ideas: A3630 works 100%, Cyberstorm MkII 95%? :cry:

[leofoe]

I do not have the AmiDock problem any more. The problem is that some system programs like HDToolbox and Screenmode prefs do not work.
I think the dummy library and related are much older than the ones I use.

[leofoe]

Yep.

[leofoe]

@glitch: Thanks for your suggestions. I installed OS3.9 and BB1 and BB2 only. These are the stock libraries, aren't they?

@adolescent: WhichAmiga reports it as a 68060/68060mmu.

[leofoe]

@glitch: Starting from a WB3.1 floppy these programs do not crash.

@adolescent: Showconfig also reports it as 68060/68060mmu.