Full Motion Video module schematics?

[Chain]

good luck to find a schematics. imho they dont exists anymore.
green tint can be also cap problem.
If you tell me which pins you need, i can measure it for ya on a good unit with a scope

ive repaired one unit today (78L05A dead, cap shorted) so let me know asap as i have it opened on a surgery table now..

[Chain]

did you replaced all caps in fideo output? not only ellyt caps, but also those ceramic ones, or at least check them if they are ok. if its working, but image has a tint then it must be problem with video out (something probably shorts red or blue video signal)