Blizz 1230 SCSI kit, how i can see thar damn 1230scsi.device?

[Chain]

I finally decided to order scsi kit from amigakit.
today its arrived (veryfast)

so ive installed one 16mb simm just for testing, atach scsi ribbon, plug whole sandwich together and intall it into my 1200.

and now now i can see/mount/whatever cdrom or zip drive?
cd and zip is 100% working (im using it with A2000+oktagon, so its properly daisychained and terminated.

on diskette from amigakit its only bunch of unusable tools or what? hdtoolsbox (tooltype askdevice) cant see 1230scsi.device too

what i can try now?

(added16meg sim is of course visible and usable (32+16=48meg fast)


 :evil:  :madashell:  :boohoo:

[Chain]

os 3.5 BB2

 setpatch dint patch 1230scsi.device too

[Chain]

6hours of testing and still sh*t

[Chain]

of course, there is only one cable with red marked pin one.

i cant see 1230scsi device tihout thar damn cable.

so its only simm holder, for 100 euro, FU*K

 :madashell:

[Chain]

my amiga is working fine, i can see additional 16meg simm on scsi kit

i know, pin 1 is near simm socket, its installer step by step like in manual


strange thing

i see only carddisk.device and scsi.device in hdtoolbox


tested with three blizzards (phase5, dce, old, new)

[Chain]

its not funny u know

i just cant see 1230scsi.device in hdtoolbox

[Chain]

LOL, there is no problems with drives!!!

now tried under 3.1, its the same, THERE IS NO 1230scsi.device

drives are working fine with other miggys

NO DRIVES CONNECTED, still cant see scsi device in any scsi inquiry tool


>version scsi.device
scsi.device 37.64
>version 1230scsi.device
object not found

[Chain]

as i wrote


>version scsi.device
scsi.device 37.64
>version 1230scsi.device
object not found

[Chain]

im just a n00b when connectin some strangescsi to another active terminated lvd scsi etc..

Im not badmoughting amigakit, ok?

i was searching my mistake BEFORE mail to amigakit.
i hope its clear now

[Chain]

Wooohoo
i got mail from amigakit

there is softscsi tool, i can see it if its scsi rom patched (8.1)





passive terminator, just as ithought it worked fine, first cd burned, readed, wirhout any problem

but why it needs to be patched to v8.1?

Is there any way to burn it into 27c256 eprom and replace it on scsi board?
thats the q..

[Chain]

still its strange, why i cant see it without any patches?

backto1995orwhatewer> you bought bliz with scsi kit and its not working, just plug it in and you cant see 1230scsi.device?
its normal situation?

[Chain]

amije wrote:
1230scsi fix

there is a 1230scsi.device module for the blizkick if you use it.
blizkick[/quote]

i was tried 1230scsifix too, without any luck

[Chain]

Flashlab wrote:
You have to set the scsi device in the Tooltypes of HDToolbox if I recall correctly. Then it will use that device driver.

tried, without any luck

[Chain]

Flashlab wrote:
Maybe your scsi kit is busted! Or try a rom update?

thats a correct! it needs scsi rom update, but whyy?

[Chain]

x56h34 wrote:
Another thing to try is to use different memory on the blizzard and the scsi kit.

Last but not least, do not forget to set the memory speed jumper to 70ns (located on B1230-IV card) when SCSI-KIT + SIMM is attached/used with B1230-IV. This is an absolute must, as per Phase 5 manual.

im not that stupid and i have (and read) manuals  8-)