Author Topic: PCMCIA angled card :) (Read 4522 times)

Chain · « **on:** January 15, 2006, 01:11:22 AM »

we are trying something crazy

http://chain.3dgrafika.cz/temp/pcmcia/
with PCMCIA card in tower...

Chain · « **Reply #1 on:** January 15, 2006, 11:01:50 AM »

strange, it works for me

((

try this
link

:bump:

more photos

Chain · « **Reply #2 on:** January 15, 2006, 02:12:40 PM »

nobody interested?

ive found howto use pcmcia card in tower without that damn overpriced angle adapter

:crazy:

Chain · « **Reply #3 on:** January 15, 2006, 04:02:55 PM »

Overpriced?: two connectors for 20 quids

yes, card is strpipped and connector is carefuly bended, no broken pins :-D
And if you broke some pin, well, there is a bunch of other cards for 5 eur or less

Chain · « **Reply #4 on:** January 15, 2006, 06:06:02 PM »

No wifi, its a x-jack connector on basic 10mbit 3com ethernet card 589. as i say cost around 4 eur one piece - good material for testing

Chain · « **Reply #5 on:** January 15, 2006, 06:42:36 PM »

Have you seen the price of PCMCIA connectors in small quantities? of course .) here you can buy at electronic store how much you want

small run of pcb

heh of course

http://www.cyberresearch.com/images/products/1070583239.600.jpg

cable can be very long i think, so next project will be add pcmcia slot to backplate

Chain · « **Reply #6 on:** January 15, 2006, 06:44:24 PM »

Have you seen the price of PCMCIA connectors in small quantities?
Also, add in the price for a small run of PCBs to solder them to. - this is two typical argument for HOMEMADE ADAPTER IS STRICTLY PROHIBITED! YOU MUST BUY OUR PRODUCT FOR 20 QUIDS! :lol:

sorry, i must just laugh..

Chain · « **Reply #7 on:** January 15, 2006, 06:49:08 PM »

how to say it. European market is against homemade whatever, but not always, and not our:

BLPK22-S068H5 - Lowprofile pcmcia smd male connector = 36,-CzK (0.8 GBP)

and bunh co pcm you cam made for approx 60czk (1-10pieces)

Chain · « **Reply #8 on:** January 15, 2006, 06:53:21 PM »

180 degree bend will be not possible i think

Chain · « **Reply #9 on:** January 15, 2006, 06:54:01 PM »

can anybody close this tread?

its agains amiga community

Chain · « **Reply #10 on:** January 16, 2006, 06:01:33 AM »

I just want to give hint howto directly use €4 pcmcia card in a tower.
But there are many votes agains it :lol:

--------- THREAD @ CLOSET ----------

Author Topic: PCMCIA angled card :) (Read 4522 times)

Chain

PCMCIA angled card :)

Chain

Re: PCMCIA angled card :)

Chain

Re: PCMCIA angled card :)

Chain

Re: PCMCIA angled card :)

Chain

Re: PCMCIA angled card :)

Chain

Re: PCMCIA angled card :)

Chain

Re: PCMCIA angled card :)

Chain

Re: PCMCIA angled card :)

Chain

Re: PCMCIA angled card :)

Chain

Re: PCMCIA angled card :)

Chain

Re: PCMCIA angled card :)