Welcome, Guest. Please login or register.

Author Topic: Bernoulli 230 - howto use it?  (Read 2500 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline ChainTopic starter

  • Hero Member
  • *****
  • Join Date: Jun 2005
  • Posts: 1324
    • Show all replies
    • http://chain.3dgrafika.cz/aktivity
Bernoulli 230 - howto use it?
« on: December 11, 2005, 06:15:19 PM »
Is there any way to use this old box for archiving system in my a2000 ? (oktagon 2008 inside, wb 2.1)
Seems to be working, i can see it on scsi bus, but i dont have any clue how it lools mountlist for this 230MB media.

and just another question:
Is there any recommended tape (ie QIC, DDS) archiving device for those old scsi?
Capacity around 4/8gig is too much coz i have only 1gig drive inside my beloved miggy :)

thans for all sugestions
too lazy to use shift key properly...
 

Offline ChainTopic starter

  • Hero Member
  • *****
  • Join Date: Jun 2005
  • Posts: 1324
    • Show all replies
    • http://chain.3dgrafika.cz/aktivity
Re: Bernoulli 230 - howto use it?
« Reply #1 on: December 11, 2005, 10:39:56 PM »
http://www.recycledgoods.com/ProductDetails.aspx?productID=9875&SubCategoryID=229&CategoryID=1&CategoryName=&SubCategoryName=&Selection=72&HDSelection=0
Thats exactly my piece :-)

Technical Specifications.

Drive Performance:
Data Transfer Rate: up to 20 Mbits/sec
Disk to Buffer: up to 13.33 Mbits/sec
Effective Access Time: 18 ms
Drive Reliability
Mean Time Between Failure: 75,000 hours
too lazy to use shift key properly...
 

Offline ChainTopic starter

  • Hero Member
  • *****
  • Join Date: Jun 2005
  • Posts: 1324
    • Show all replies
    • http://chain.3dgrafika.cz/aktivity
Re: Bernoulli 230 - howto use it?
« Reply #2 on: December 14, 2005, 09:50:06 AM »
Hdtoolbox says Write error 29! :(((
too lazy to use shift key properly...