Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: A2000 w/Vector 030 Accelerator  (Read 1320 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline dwezelTopic starter

  • Newbie
  • *
  • Join Date: May 2005
  • Posts: 9
    • Show all replies
A2000 w/Vector 030 Accelerator
« on: May 23, 2005, 02:36:26 AM »
I am fairly new to the Amiga world and recently purchased an Amiga 2000 with an IVS Vector 030 accelerator that had 32 megs of ram and attached a 120meg SCSI HD / 4x CD-RW.  This system has the 3.1 roms.  I am trying to figure out how to upgrade the HD to a 4gig SCSI I have.   Are there any other Vector accelerator owners out there that might give me a hand?
Logged
 

Offline dwezelTopic starter

  • Newbie
  • *
  • Join Date: May 2005
  • Posts: 9
    • Show all replies
Re: A2000 w/Vector 030 Accelerator
« Reply #1 on: May 23, 2005, 07:22:59 PM »
Being that the device driver I have is dated back to 1992 can I assume there is a limit of 4gb size or is it even smaller than that?
Logged
 

Offline dwezelTopic starter

  • Newbie
  • *
  • Join Date: May 2005
  • Posts: 9
    • Show all replies
Re: A2000 w/Vector 030 Accelerator
« Reply #2 on: May 23, 2005, 10:44:48 PM »
Ok I need some more help.  I tried what you suggested.  I booted up the computer with the original hard drive and added the second hard drive as SCSI ID1.  I changed the information on the HDtoolbox icon to add device=IVS_SCSIpro.device and made sure this file was in the devs AND Expansions folders.  When I launched the HDtoolbox it says Driver not installed.  How do I install the driver?  I thought copying the ivs_scsivector.device and the ivs_scsipro.device to the devs folder was how I installed them (and rebot of course).  Help!?!?!
Logged
 
Pages: [1]   Go Up
« previous next »