Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: SCART RGB Lead problem  (Read 26311 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline alexh

  • Hero Member
  • *****
  • Join Date: Apr 2005
  • Posts: 3645
    • Show all replies
    • http://thalion.atari.org
Re: SCART RGB Lead problem
« on: April 10, 2011, 01:33:33 AM »
You could try using the Composite video output as the sync for your RGB. See the Stedy diagram for info.
Logged
 

Offline alexh

  • Hero Member
  • *****
  • Join Date: Apr 2005
  • Posts: 3645
    • Show all replies
    • http://thalion.atari.org
Re: SCART RGB Lead problem
« Reply #1 on: April 10, 2011, 10:33:08 AM »
Quote from: tribz;630653
So which pin should I solder to where instead?
?? You linked to the diagram!

An RCA plug (which goes in the yellow RCA socket on the rear of the A1200) Wire it to pin 20 & pin 17 (disconnect whatever normally comes from 23-pin) as per the diagram.

« Last Edit: April 10, 2011, 10:37:05 AM by alexh »
Logged
 

Offline alexh

  • Hero Member
  • *****
  • Join Date: Apr 2005
  • Posts: 3645
    • Show all replies
    • http://thalion.atari.org
Re: SCART RGB Lead problem
« Reply #2 on: April 12, 2011, 08:08:34 AM »
AmigaKit's cables are most likely to work with LCDTV.

I think this thread was an example of a broken TV SCART socket design which had grounds incorrectly wired inside the TV. By leaving a few out it got rid of the problem.
Logged
 
Pages: [1]   Go Up
« previous next »