Welcome, Guest. Please login or register.

Author Topic: IndivisionECS will have dual video output!  (Read 34372 times)

Description:

0 Members and 3 Guests are viewing this topic.

Offline alexh

  • Hero Member
  • *****
  • Join Date: Apr 2005
  • Posts: 3644
    • Show all replies
    • http://thalion.atari.org
Re: IndivisionECS will have dual video output!
« on: September 02, 2009, 11:35:35 PM »
What affect (if any) does the scan-rate conversion have on the smoothness of the scrolling?

Does the VGA cable provided reach the spot on the rear of an A500(+) below the floppy drive where it is suitable to drill a hole?

As the IndivisionECS is a re-creation of the Denise chip in an FPGA, what are the prizes for finding the first bugs? :)

(I'm sure it is upgradable, right?)
« Last Edit: September 03, 2009, 12:11:29 AM by alexh »
 

Offline alexh

  • Hero Member
  • *****
  • Join Date: Apr 2005
  • Posts: 3644
    • Show all replies
    • http://thalion.atari.org
Re: IndivisionECS will have dual video output!
« Reply #1 on: September 03, 2009, 12:13:38 AM »
Quote from: NovaCoder;521909
so it might be possible that you could run (for example) DOOM better on a little A600 that you could on a standard A1200 using the IndivisionECS.

Not with a 7MHz 68000 :)
 

Offline alexh

  • Hero Member
  • *****
  • Join Date: Apr 2005
  • Posts: 3644
    • Show all replies
    • http://thalion.atari.org
Re: IndivisionECS will have dual video output!
« Reply #2 on: September 03, 2009, 08:01:03 AM »
Quote from: kolla;521920
Which brings us to the question of whether indivision-ECS will fit along with Apollo-630... will it? :)
What is more important, will it fit alongside the unreleased A600 accelerator from Jens Schoenfeld (if it ever gets made) :) I imagine that Jens would make it fit.



The A603 RAM card will fit against the prototype, but the IndivisionECS hangs over the corner somewhat...
« Last Edit: September 03, 2009, 08:08:33 AM by alexh »