Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: Picasso IV..defect  (Read 4675 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline alexh

  • Hero Member
  • *****
  • Join Date: Apr 2005
  • Posts: 3644
    • Show all replies
    • http://thalion.atari.org
Re: Picasso IV..defect
« on: February 01, 2009, 09:11:43 PM »
Be very careful the plastic on the sockets of these chips is rubbish. It has hardened to become as brittle as glass.
Logged
 

Offline alexh

  • Hero Member
  • *****
  • Join Date: Apr 2005
  • Posts: 3644
    • Show all replies
    • http://thalion.atari.org
Re: Picasso IV..defect
« Reply #1 on: February 08, 2009, 08:34:51 PM »
Can you run P4info and post the results?

You probably need to change the default scan rate conversion?

i.e. Set the scandoubler output frequency rate to 50Hz if your monitor supports it.


Logged
 

Offline alexh

  • Hero Member
  • *****
  • Join Date: Apr 2005
  • Posts: 3644
    • Show all replies
    • http://thalion.atari.org
Re: Picasso IV..defect
« Reply #2 on: February 09, 2009, 12:47:09 PM »
The version of your PCB is written on the card in Silk Screen.

If you post the results of P4INFO then we will know what revisions of PIV chips and firmware you have.

The boot menu is activated by holding down either [Shift] key when resetting the machine. (Only available on later firmware)

See Chapter 6

http://www.sophisticated-development.de/software//Manuals/English/ConciertoIV.pdf
Logged
 
Pages: [1]   Go Up
« previous next »