Indivision ECS with widescreen LCD

[giZmo350]

My Indie ECS works perfect on a 19" widescreen LCD! Workbench and games work great! I use 800x600 with WB. The scan-doubler is one of the best ever made by Jens. Brilliant!

[giZmo350]

@Oldsmobile_Mike  The guides you have posted are very good, but I still have a few questions about the indivision ECS.

@ALL
First where do you get the indi.card  configuration files for the picasso96 if you do not have and A1k.org account?

I thought maybe here.....
http://www.a1k.org/forum/showthread.php?t=31402

BTW, let us know if this procedure actually works!!!!
Also, would it be possible to make these files available to those of us that don 't have an A1K acct?
I would like to see if this really works!

PIC96IECS_0.1a.lha
PIC96IECS_0.1b.lha
PIC96IEC_0.2.lha
indi.card.0.2c.lha
indi.card.02e.lha
indi.card.02r.lha
indi.card_02s.lha
indi.card.02v.lha
indi.card.02w.lha

can the indivision ECS use graffiti.library programs ie chunky graphic games, mac emulators, or picture viewers?  Do you just install the graffiti drivers like you using a real graffiti or do you do something else?  Is the resolution limited to 384×576 pixels on like on a normal OCS / ECS Amiga with a real graffiti or can the indivision go up to 768×576?

This I don't know....

Lastly is there any advantage of using an ECS denise over and OCS denise with the indivision ECS.  I know you will need an ECS Agnus but other than a couple modes that the ECS denise can display over the OCS denise will this make a big difference with the indivision?

I installed an ECS (SuperDenise) Denise in my A2K with the IndiECS and it had no advantage. (I need to pull that back out!) :hammer:

From Jens' WiKi page: Indivision ECS can display the ECS screenmodes even on systems that only have an OCS Denise chip, the only requirement is an ECS Agnus chip (which is usually present in all Amiga models made in 1990 or later).

[giZmo350]

Well, finally got back to this.  I downloaded the 1.10 firmware and flashed the Indivision ECS.  Hooked up my widescreen, no workie.   My non-widescreen LCD works though.

That's so odd. Mine works perfect on a 10 year old Envision POS. Too bad I gotta get my a$$ to bed pronto and work all weekend! I woulda went down to the basement and tried a few other widescreen monitors on the A500. The reason I say that is the old Envision is connected to the Miggy 1200 in the man-cubby on the second floor and the A500 is on the bench in the basement. Maybe I can get a chance Sunday evening.

[giZmo350]

83.9% of all statistics are made up on the spot.

You just made that up! :hammer: :roflmao: