« on: September 12, 2014, 08:14:49 PM »
Hi all, I have an Indi AGA MKII (non-cr) in an A1200 rev 1B or 2B mobo (I forget which). It's been working fine with (I think Retrofans config) for about a year and a half until yesterday. I noticed that the Indy splash screen is filling only about 1/3 of the screen vertically and about 3/4 or so horizontally when I fire up the unit. When WB takes over the screen is normal size (I assume due to the WB screen mode). However, all my apps and games only display in the reduced size just mentioned. I reflashed the config and it worked OK for a few times but now it seems that it just won't retain the config and boots up with the reduced size Indy screen every time. Anyone else have this problem ever? Any fix? Can I clear the Indi flash memory and the try a reflash? I have NOT disassembled yet and reseated everything as I would like to try to avoid that just now? Any thoughts? Thanks in advance....
PS... gotta go to Home Depot, be back in a bit...
Logged
A500: 2MB Chip, 8MB Fast, IndiECS, MiniMegi, IDE4ZorroII on Z-500, KS1.3/KS3.1, WB3.1&BWB
A2000HD: 2MB Chip, 128MB Fast, P5:Blizz 2060@50MHz, PCD-50B/4GBCF, XSurf100, RapidRoad, IndiECS, Matze RTG, MiniMegi, CD-RW, SunRize AD516, WB3.9
A1200: 2MB Chip, 64MB Fast, 4GBCF, GVP Typhoon 030 @40MHz w/FPU, Subway USB, EasyNet Ethernet, Indi AGA MKI, FastATA MK-IV, Internal Slim CD/DVD-RW, WB3.5
Surfing The Web With AMIGA Is Fun Again!
