More questions about AHI with my Delfina Card

[sandpiper]

@Wildstar1063

You should try the MHI driver available from Aminet. I works quite nicely with my Delfina Flipper and AmigaAMP. There are instructions in the package to configure it for AmigaAMP.

[sandpiper]

@wildstar1063

My Delfina Flipper works very well with the following configuration:

delfina.audio: ver 4.6 -> note: this is the only file in my devs:ahi folder. Don't need paula audio with a delfina board

ahi.device: ver 4.18 (could be you have a mixture of ver 4.x and 6.x files?)

delfinampeg.device: ver 1.6

delfina.library: ver 4.16 B43

In my userstartup I have the command: Delfmem >nil:
(I did use DelfInit but removed it -> can't remember why now)

As stated before I use MHI with AmigaAMP. With MHI, AmigaAMP plays mp3s with virtually no cpu load (because it uses delfina dsp through delfinampeg.device). I don't use Amplifier.

This setup works very well with my system. You may want to give this a try with the Lite board.

My system:

A2500 w/ Blizzard 2060,PIV,WB3.9, 96MB Ram, X-Surf, Delfina Flipper,Subway,GVP IO etc

Hope this helps.