Welcome, Guest. Please login or register.

Author Topic: A4000 re-repair  (Read 3615 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline mechy

Re: A4000 re-repair
« on: July 23, 2021, 04:54:47 PM »
I would tin any exposed bare copper traces and/or coat them. Solder the chips on then run jumper wires where needed.
The board doesn't look too bad so i think you will be fine. good luck! Continuity check everything you repair with the multimeter
« Last Edit: July 23, 2021, 04:55:55 PM by mechy »