Welcome, Guest. Please login or register.

Author Topic: Torn between accelerators  (Read 2555 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline mechy

Re: Torn between accelerators
« on: July 16, 2017, 05:48:44 PM »
Quote from: a1200;828278
I am seriously torn between running a Blizzard 1220 card, a Blizzard 030 and an 060 board. The modest board shows the Amiga off with just 4MB fast mem. The 030 with 64MB is both compatible and powerful but it can't run the latest big demoscene productions and the 060 is expensive and impressive but least compatible for classic games. Only room for 1 Amiga. Which should I stick with?


bliz 060 for sure.
 

Offline mechy

Re: Torn between accelerators
« Reply #1 on: July 17, 2017, 04:44:21 PM »
Quote from: a1200;828311
Ok after considering what's possible with the 030 /68882  50MHz you only need to look at something like TBl's Tint demo. The 060 is going to cost me at least twice as much but up to three times as much. My Blizzard's 030 chip is a revision C so the whole thing runs with a moderate temperature. If I got another 060 (had one years ago) it would run more stuff but the it would be like what about PPC/Picasso/audio card etc. So going to stick with the B1230/50MHz/64MB/FPU. Thanks to all who put opinion across on here and the other forums I posed this question.

not sure what you mean about ppc/picasso/audio...
i think you are confusing the blizzard 1260 with the blizzard ppc board?
In any case you cant go wrong with the bliz 1230.