Hi, I have a CDTV with a display issue (Rev 2.2.1 motherboard). After being switched on for a couple of minutes, the display starts flickering / jumping.
I have 2 x RF video modules, 1 x scart video module and a 23-pin->Scart cable - all of which were working fine for absolutely ages. This issue is a few weeks old.
I have removed the casing, and cannot see any signs of leakage on the electrolytic capacitors.
Any help to keep this CDTV going would be really appreciated.
I would check all psu voltages.
if they are good, reseat the chips.
if that doesn't work i would possibly suspect caps.
