Ok, so I got an idea that I'm gonna need some help on.
I want to use my DPS TBC IV in conjunction with my DPS PAR card but I am out of slots.
According to the manual the TBC IV only utilizes the ISA slot for power only. Two additional connections are necessary. A serial connection to the Amiga which is already an external cable, and a 50 pin ribbon connection from the par to the TBC IV.
I was thinking I could build an external enclosure for the TBC with a ISA plug wired to an external power supply that supplied the correct power the correct ISA slot pins. I would need to figure out a moderately clean way to pass the 50 pin ribbon connection externally too.
So first off, what do ya'll think? Do you see any major problems with my plan?
Second, Does anyone know what the pin out for those ISA slots are so I can provide the right voltage to the right pins?
Thanks!
Sounds like it will work fine.
pinout is here
http://pinouts.ru/Slots/isa_pinout.shtml double check it and use it at your own risk
mech
