I have found a number of tutorials for using a large hard drives and one tutorial for using a gb SD card in a real Amiga 1200. I have been unable to get either a 4gb or a 16 gb SD card to work using the tutorials. Both are Sandisk.
I can get them to show up in Win UAE but not on my A1200. In fact, it won't boot at all using the SD cards.
Did you set max transfer correctly on the sd?
If that is not the problem i would suspect the ide to sd adapter. They are not all created equal,wired correctly or even made well. If you are using a SDHC card your adapter must support SDHC also.
Its not so much a case of cf or sd being picky,some cards simply do not follow the standards correct. sandisk is usually a good bet to work if you didn't buy fake ones off ebay or somewhere.
