Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: Workbench 1.3.1  (Read 2955 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline HersSteTopic starter

  • Newbie
  • *
  • Join Date: Mar 2005
  • Posts: 3
    • Show all replies
    • http://web.bvu.edu/students/hersste/index.html
Workbench 1.3.1
« on: March 30, 2005, 01:44:22 PM »
Is there anyone that could lend me some Workbench disks, or get me coppies of workbench disks.  Our A2000 boots up to workbench 1.3.1 and then does some funky stuff.  If anyone can help email me at HersSte@bvu.edu subject "Amiga".  I am located in North West Iowa, USA.
Logged
 

Offline HersSteTopic starter

  • Newbie
  • *
  • Join Date: Mar 2005
  • Posts: 3
    • Show all replies
    • http://web.bvu.edu/students/hersste/index.html
Re: Workbench 1.3.1
« Reply #1 on: March 30, 2005, 02:58:20 PM »
I guess for now I'm SOL!!  I've tried to look up some of the hardware in my A2000HD, but I can't find specs on some of the boards and stuff...
Logged
 

Offline HersSteTopic starter

  • Newbie
  • *
  • Join Date: Mar 2005
  • Posts: 3
    • Show all replies
    • http://web.bvu.edu/students/hersste/index.html
Re: Workbench 1.3.1
« Reply #2 on: March 31, 2005, 12:28:14 AM »
I have good news, and bad news.  The bad news is that I have been unable to find a keyboard.  One of my proffs had one for an A1000 but it ued an RJ4 connecter not a dim connector so I was unable to use it.  However I figured out a way to stay in workbench 1.3.3.  When the program starts that has been causing trouble, I unplugged the HD from the bus line. Then when workbench came back up with the error, I plugged the HD back in, and hit retry.  The program did not start back up, but workbench stayed open.  So at least now I can look and see what all is on the computer.
Logged
 
Pages: [1]   Go Up
« previous next »