Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: MegAChip - A500 agnus question  (Read 4126 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline countzero

  • Hero Member
  • *****
  • Join Date: Mar 2005
  • Posts: 1938
    • Show all replies
    • http://blog.coze.org
Re: MegAChip - A500 agnus question
« on: August 06, 2008, 03:47:52 PM »
I'm sorry but the NTSC agnus simply won't work in your PAL machine (been there, done that). You also need to change your crystal to make your amiga fully NTSC. At least that's what I was told, but I never tried.
Logged
I believe in mt. Fuji
 

Offline countzero

  • Hero Member
  • *****
  • Join Date: Mar 2005
  • Posts: 1938
    • Show all replies
    • http://blog.coze.org
Re: MegAChip - A500 agnus question
« Reply #1 on: August 06, 2008, 04:07:02 PM »
I don't think the pin 41 hack makes the agnus PAL magically. Probably it just asserts the agnus so that it will start in PAL mode.

Also using RGB scart doesn't mean you skip PAL/NTSC. A PAL amiga will still output PAL (50 Hz) and an NTSC amiga will output NTSC (60 Hz).
Logged
I believe in mt. Fuji
 

Offline countzero

  • Hero Member
  • *****
  • Join Date: Mar 2005
  • Posts: 1938
    • Show all replies
    • http://blog.coze.org
Re: MegAChip - A500 agnus question
« Reply #2 on: August 06, 2008, 04:38:39 PM »
There is no NTSC/PAL distinction for Denise. Only agnus is different AFAIK (and yes I frequently swapped denise's betwen PAL/NTSC machines).
Logged
I believe in mt. Fuji
 
Pages: [1]   Go Up
« previous next »