Probem installing OS3.9 on 1200

[MozzerFan]

Do you have kickstart 3.1 ROM ?
Edit: Never mind. Read somewhere that in os3.5 and 3.9
a diskbased version of workbench.library is being used.
With os3.1 workbench.library used to reside in ROM.
If I were you I would check out if you have the right
setpatch in c: and workbench.library in libs:
Look on the os3.9 cd and compare it to what version you
have on your harddisk.

Regards,
Lloyd

[MozzerFan]

Just found this thread in a german forum.
The guy had the same problem as you.
During his installation of os3.9 he had a write-error,
and the c:setpatch command got corrupted. So he copied
it again from the os3.9 cd and his problem was solved.

Regards,
Lloyd

[MozzerFan]

Well, on the emergency-disk, setpatch is also started.
Reboot with the system-disk you created your emergency-
disk with and check the version of setpatch on the
emergency-disk, and if it's not corrupted. On my own
disk setpatch has version 44.17
Also check if the following is in your
emerg. disks startup-sequence:

Quote from os3.9 faq:
The following lines (in bold) should appear in your S:Startup-Sequence as follows:
SetPatch SKIPROMUPDATES "scsi.device"
Change the entry "C:IDEfix" to C:LoadIDE START QUIET
The necessary reset will be done automatically by SetPatch so the line
"C:LoadIDE RESET QUIET" is not needed.

Regards,
Lloyd

[MozzerFan]

BTW here you can find a
description of what setpatch in os3.5 does. I assume it
works the same in OS3.9. As I told earlier, workbench.lib
used to reside in kickstart ROM, but a diskbased version
appeared in OS3.5 and 3.9. Maybe if you read the document
you will understand the function of setpatch a bit more.

Regards,
Lloyd

[MozzerFan]

Hmm, that looks ok.
So what if you startup with the emerg. disk and
start cli and do 'version workbench.library' ?
If setpatch is really ok, it should have version 45.x
If HDToolbox doesn't work, maybe you can try hdinstool
from aminet.

Regards,
Lloyd