I have a D-Box for my A1200 with Phase 5 Blizzard IV +SCSI. I'm a little concerned about the accelerator connector breaking because the accelerator board does not firmly mount to the 1200 mother board. It flops side-to-side and is only kept in place by the tension of the SCSI cable.
I checked the case and the board and I don't see any easy way to secure the accelerator board to the case to keep it from moving. Has anyone had a similar problem and come up with a solution?
As far as I can tell, there are no mounting brackets in the D-Box case to secure the accelerator. I could rig a bracket from the drive bays or the power supply, but I rather not. I could also secure it to the removable side panel, but that might be annoying if I have to open the case on that side. Maybe run a piece of plastic under the 1200 board and the accelerator and place a clip over it and the accelerator?
Thanks,
Bubba
