I'm setting up A1200 Tower with the following config:
Mediator SX with Voodoo3 and Ethernet
1D3 Mother board, 3.1 ROMs
Blizzard 1230 IV/50mhz, SCSI Kit
Subway USB via clockport
When I connect the subway, the machine does not boot. I'm pretty sure the cables are connected properly. I don't have the mediator drivers installed for the cards, but pciinfo finds all the cards on the PCI bus, so I'm assuming the mediator is OK.
My MB has a bad external floppy port. Is it possible that the clockport is also damaged? Are there any diagnostic apps I can use to check the clockport?
Thanks,
Bubba
