Hi:
i'm having an odd problem with a cybervision 64 3d.
After a couple of months without having time to find out what happened to my amiga 3000, i dismantled it yesterday. I took everything apart and built it together afterwards.
That's the point where i realized that the cybervision 64 3d was not being recognized by the early startup menu. I thought that there could be a contact problem, reinserted the card, nothing. Another zorro slot, nothing.
After that i tested it on my A4000, again the only result was that, depending on the zorro slot, all the other zorro cards were "erased" from the e.s.menu.
Any ideas what could be the problem.
Best Regards
