Electrohome ECM1310 Multisync Help!

[Boot_WB]

Doesn't seem to be too much info about it on the web:

from http://www.kalibrering.no/instlist.htm

Electrohome Ltd. - ECM1311 - Monitor, Farge, TTL og RGB input, 15 til 32 kHz hor.scan. - MON - ELEC

www.aminet.net

Try MONspecsMUI from aminet, but READ THE INSTRUCTIONS BEFORE USE, and if in doubt, DON'T MESS WITH IT - as it can blow your monitor up if you are not careful.

Should be able to get those hi-res modes centred by adjusting the syncstart/stop and blankstart/stop values, but BE CAREFUL - you don't want to blow your new multisync up.

Good luck