Tried out the new Indivision AGA MK-II this evening in my A4000T, seems to be something wrong I am doing since I get no picture at all from this little beauty.
Still trying to decide what monitor to buy for my new setup with Mediator/Radeon + IV-AGA-MK2, so it was just a test really to see if I could bring up a picture on my old Eizo monitor, which is a model T961.
With the IV-AGA-MK2 sitting tight, I used a DVI -> VGA adapter to bring the signal to the monitor. When starting, the monitor says it's picking up a signal of fh 0.0 kHz, fv 65.3 Hz, and hence, no display. The T961 is capable of fh 30 - 115 kHz, fv 50 - 160 Hz.
Three things I can think of here:
1. Wrong type of DVI -> VGA adapter. I am a complete novice to the DVI standard so I may have used the wrong one. The one I picked up is labelled "FG-DVI-I-VGA".
2. The T961 is too ancient for this type of display. Really, I stopped looking at monitor specifications 15 years ago. If they don't work these days, just throw them out and buy a new one at your local 7-11.
3. IV-AGA-MK2 faulty, or not properly seated. How hard is it safe to push it without breaking anything?
Any ideas?
