Issues with A600 June Bug Rev 2D motherboard :(

[ad-rs1600i]

Hi Everyone,

I brought a CF drive for my A600 but it pops up with a

'ADH0 Program failed (error #80000003) Wait for disk activity to finish' - with an option to 'Reboot'

 when the machine attempts to boot with the disk prep tool supplied on the disk (nice AmigaKit.com solution). The drive works fine within my friends A1200 and I have a 3.1 boot rom so the conclusion I have arrived at is that there is something very wrong with my motherboard which is a June Bug Rev 2D motherboard

Just wondering if anyone else has experienced issues with this board? I understand rev 1.1 and 1.5 are the motherboards to own within a A600.

Many thanks in advanced,

Adrian

[ad-rs1600i]

Many thanks for all the replies, I am genuinely shocked at the response!

I brought the CF drive as a 'A600 kit' so I don't think there is a special file system on it or it is a transfer rate issue. Having said that, I have nothing more than my sense of it feels like the issue is with the motherboard revision, as I am very green to the world of Amiga other than shoving disks in them!

It was sold as a kit by a reputable Amiga equipment supplier so I am sure there would be a disclaimer about an accelerator required if this was the case

Thank you everyone for your input

[ad-rs1600i]

Try a shorter IDE cable? Do you have a trapdoor memory expansion? Tried removing it?

I've never ever heard of an issue with A600 motherboard revisions for any reason.

Edit : Guru error 80000003 is indeed a RAMlib error. Indicates the opcode contains an illegal unaligned address. This is mainly due to programs issuing a 68020 memory access. Sometimes due to a too low memory stack. Data Corruption due to bad RAM. Trying to access 32-bit RAM on a 24-bit processor. KS2.x+ incompatibility.



Ask Amigakit for help, they are a friendly company.

Wow! - I am truely speechless - very well done! Sadly I ordered a CF drive prepped with SFS file system - my fault totally - very embarassing.... Still I'm a newbie so that is my excuse and I am stick with it!!!

I am guessing SFS must be a 32bit file system then like Fat32 in the pc world? My 68000 is 16 bit I think hence why it through a wobbly at a 32bit ram request - he he

[ad-rs1600i]

Correct, it was ordered as A1200 spec NOT A600.
As such I set it up with SFS.

Best thing to do is copy all the data off the drive in a 1200, then alter the filesystem in HDToolBox, then format and copy all data back.

EDIT:- If you return the just CF card to us with large letter stamp, we can reprep it for you.

Thank you - my mistake totally - I have explained in my problem ticket

I haven't really got anywhere to copy it too on the A1200 other than the RAM disk so I think I will post it back to be setup like a A600 CF disk I want to keep the OS loader menu etc. as I think that is really cool.

Blooming annoying, I really wanted to play Beneath a Steel Sky on it!!

Many thanks everyone

[ad-rs1600i]

@ad-rs1600i
It's not about 16bit vs. 32bit, it's just that SFS has some optimizations that only work with 68020 or better, using functions that do not exist on 68000.

Thanks for that - I have plenty to learn I think!