Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: Install CDrom in A1200? Need 5V help plz  (Read 3533 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline a1200

Re: Install CDrom in A1200? Need 5V help plz
« on: March 19, 2010, 05:49:11 PM »
+1 I also have installed internal slimine CD/DVD drives in the Amiga and used the floppy drive cable for power. I stripped back some of the plastic from the correct wires (+ & - 5v) and wrapped and soldered the CD drive wires to it then taped up the exposed wire with insulating tape.
Logged
Amiga A1200, 3.1 ROMs, Blizzard 1230 MKIV 128MB & FPU, 4GB DoM SSD, Workbench 3.1
 

Offline a1200

Re: Install CDrom in A1200? Need 5V help plz
« Reply #1 on: March 19, 2010, 05:54:36 PM »
If you check here you can get the pinouts. The Amiga drives are slightly different but the electrical connections are the same. there will probably be Amiga specific floppy power diagrams online to corroborate but I couldn't be bothered looking that hard!
Logged
Amiga A1200, 3.1 ROMs, Blizzard 1230 MKIV 128MB & FPU, 4GB DoM SSD, Workbench 3.1
 

Offline a1200

Re: Install CDrom in A1200? Need 5V help plz
« Reply #2 on: March 19, 2010, 05:55:26 PM »
@save2600

Quote
A lighter works extremely well for stripping back wire in case you don't want to accidentally 'splice and dice' the cable


Good tip!
Logged
Amiga A1200, 3.1 ROMs, Blizzard 1230 MKIV 128MB & FPU, 4GB DoM SSD, Workbench 3.1
 
Pages: [1]   Go Up
« previous next »