SANA-2 config for Mediator 4000 Di & Fastethernet, and more

[awe4k]

Hi all,

I used to browse the internet correctly with an X-Surf. I recently bought a mediator 4000 Di in which I've plugged in a Voodoo3 and a Fastethernet card. I use Genesis and Aweb and Ibrowse sometimes. I changed the genesisprefs in order to use the PCI NIC, and since then I can read pages from the net, but it seems that everytime that I have to send data (eg I fill a form) it does not work.

Does it mean I have to change the SANA config? In what way?

Also, the CD that came with the mediator did have Picasso96 and Cybergraphx on it, but I have to clue of how to get either of them up and running. Currently, in the Screenmode prefs all modes appear with a CGX suffix, but I only see the AGA modes, I don't see the Voodoo modes. CGX-prefs program does not work at all. When I try to start it there is a bit of harddisk activity, and then nothing.

What am I supposed to do?

I believe that the jumpers on the mediator are correctly set. For your information, the setup includes (besides the mentioned) a CSPPC, a highway USB card, and an eFlash 4000. OS is 3.9 BB2. HD is 68-pin SCSI connected via the CS, CD-RW is IDE, and there is an internal USB card reader.

Help greatly appreciated.

Thanks!

[awe4k]

Hi,

Thanks for the advice. I have followed the instructions, ran the P96 install twice as per readme file, etc. All seems ok, but when I try to open Picasso96Mode, the HD led blinks for a moment, and then nothing.

What could be wrong?

[awe4k]

Hi,

IT WORKS! IT WOOOORRKKSSS!!!

Thanks. I just removed from DEVS:Monitors all CGX drivers, and then Picasso96 started to work. The P96Mode worked eversince too.

Regarding the internet, I removed all SANA2 info from the GenesisPrefs, and it all works again!!!

You're all great. Now I am posting at this forum on the Amiga at 800x600 24bit over 2Mbit ADSL. WOW!