Indivision Scandoubler/Flicker Fixer problem

[Englyst]

Hi folks.

I've just bought the Indivision Scandoubler/Flicker Fixerfor my A4000 and I plugged it in and I can see the PAL Hires mode nicely on my LCD monitor. But when I go into PAL Hires Laced I get the following weird picture. The fields seems to have been offset to both sides. I've adjusted the phase trim screw to see if it helped but no go.

Here's the image showing my problem:

http://www.bitboy.dk/AmigaFlickerFixer.jpg

Can anyone help me getting that adjusted or somehow lead me in the right direction?

Thanks.

[Englyst]

When I adjusted the screw the signal disappeared and then I turned it back and it reappeared. So I believe it's working. But I'll check the switch to see if it makes a difference.

[Englyst]

Well I cannot seem to see a switch on the end of the Indivision. Only a phase screw. Here's a picture of it:

http://www.bitboy.dk/FlickerFixer01.jpg

[Englyst]

NTSC Hires Lace works fine. It's just PAL Hires Lace that gives me problems. Been adjusting the phase screw like a madman to get it right..

[Englyst]

Well I do have a 24" Samsung 16:9 LCD monitor that I use for it together with my PC. It was just a temporary solution. I'll put up another CRT monitor for the Amiga to see how it goes.

[Englyst]

Thanks, I'll try to see if I can get it turned further. For now the NTSC Hires Laced resolution works.