Problems with installing SFS

[Englyst]

Hi folks.

First post here. And I've got a little problem.

I have just put a new Seagate 80 GB IDE disk on my internal IDE controller on my A4000. I was pretty sure I couldn't utilize everything on it, but that's what I had to work with.

I've downloaded SFS 1.230 and installed the filesystem in the RDB of the Seagate. It reports the drive as 75.9 GB size, but I can only use ~27 GB of it. Which is enough

But I never get any icons up on the Workbench for any of the new partitions. I've followed the SFS_OLD.guide since that was what I could find regarding installation documentation.

My config:

A4000/040/2MB Chip/16 MB Fast
Kickstart 3.1 (using Kickflash OS4)/OS3.9 with BB2
Mediator 4000 Pro
Voodoo5 5500 PCI
Realtek 8139D NIC

Can anyone help me out here? Would love to use the new disk.

Thanks in advance.

[Englyst]

Hi folks.

I hereby grant myself the stupidity award. Seems like it works now.. DOH! I'll test it before I make a final judgement :-)

Merry Christmas and a Happy New Year to everyone here!

[Englyst]

Nope.. Must be the weather :-D

I'm hoping that the Catweasel II that I've ordered will make the rest of the space on the HD available. Anyone know if this is the case?

[Englyst]

Ok, a little update. I cannot see any of the new drives (installed OS3.9 on one of them) when holding down both mousebuttons to get in the boot menu. So I can't boot from the new drive.

I can see all the drives when I'm on the Workbench. What can be wrong here? I've set the 500 MB partition as bootable and a priority of 4. My old SYS: partition has a priority of 3.

[Englyst]

The boot partition is on the first 512 MB of the disk. And I'm running the standard setpatched scsi.device.

[Englyst]

Blocksize is 512, and I tried using SFSformat but it crashes every time! Depending on how I set up the partitions it would see the partitions or it wouldn't. Freaky..

Tried to format with OS3.9 format command and it worked, but looks no faster than FFS. Using SFSCheck I can see that it reports the partition as ok.

I'll post the SFSCheck results later when I'm home.

[Englyst]

If that's the case something with the setup is wrong. Anyone know of a screengrabber util that I can use? Then I'll put  some screenshots of my config in HDToolBox online.