Hello all,
I'm having a strange and frustrating problem.
My Amiga 2000 has a manual kickstart switcher with a 3.1 and 1.3 rom, an A2091 scsi card, a scsi drive with Workbench 3.1 on it, and an inability to boot from floppy whenever the 1.3 rom is activated.
The error I get is "Please insert volume LIBS into any drive". I tried a 2.04 workbench and a 1.3.3 workbench disk -- they all say the same thing. Those disks work fine on my A600 of course.
I mentioned all the extra hardware because it is ONLY when the 1.3 rom is active, and ONLY when I have the scsi hard drive plugged into the 2091 that I have this problem. Remove the SCSI drive, and it boots fine. If it matters, I think the 2091 is the 4.1 variety with 2mb ram, and none of the 3 option jumpers set. I set the boot partition on the drive to priority -31 so the floppies would certainly come first.
My understanding is that this is not an uncommon configuration of hardware. 
Any advice is appreciated,
Bo Zimmerman
OK when you are booting with the 1.3 rom you have to use a 1.3 or lower (1.2 / 1.1 /1.0) floppy workbench.
Now when in 3.1 mode it should boot all work benches, at least it does with my Amiga 1200 which is using OS 3.9 which uses a 3.1 rom.
Now this should make sense to you, because it makes sense to me, I think, but if it doesn't make sense to you, you can contact that guy in the miner hat, is it solraK, or Wayne, you know sometimes I get things backwards, but any whoose solraK used to be a moderator / monitor who gave a pretty good display.
smerf
Just kidding Karlos