Trumpcard SCSI card from IVS

[Hotblack]

Hi all!

I've got hold of a Trumpcard SCSI, but SCSI is not for the inpatient new owner. It doe'nt mattar what i try, with jumpers on the drive and all. What i-m trying to achieve is to get an A2000 up and running. The disk works fine. I've tried the card in an A3000 and in an A4000, but the HD light an finally the Power light starts to flash. No boot from floppy is possible. Should it be set pin setup as SCSI device 2 or 6. Someone hwo is familiar to this?

Thankful for any help.

[Hotblack]

Thank's for answering. No it's not a Pro card, so i've got two jumpers to set. One is some SCSI ID 2 or 6 and one is Boot from 1,0 or 1.3 rom. That's it.

Best reguards Linus